With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

The post Victron VE.Direct to USB Interface – 4024 appeared first on Luxco Energy.

View information wirelessly such as battery status and solar panel power, plus other useful data.

The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers.

The Victron VE.Direct Bluetooth Smart dongle uses Bluetooth Low Energy, which is a technology for the Internet of Things (IoT).

The post Victron VE.Direct Bluetooth Low Energy Smart Dongle for VictronConnect App – 4022 appeared first on Luxco Energy.

300mm length – straight end

The post Victron VE.Direct Cable 0.3M for BMV-70x and Color Control GX – 4025 appeared first on Luxco Energy.

• VE.Direct LoRaWAN module (AU)

• 1.5m VE.Direct cable

• Antenna

• 1.5m power cable with 3A inline fuse and M10 eyelets

• Quick install guide

What is LoRaWAN?

The VE.Direct LoRaWAN (Long Range wide area network) module is essentially a radio transmitter which broadcasts data (in this instance information about the status of your Victron installation) to a nearby Internet of Things (IoT) gateway. The gateway should be within about 2km of your location if you live in a town, but could be as far away as 30km if you live in a rural location. This device uses infrastructure provided by ‘The Things Network’. Their network of gateways is constantly expanding and you can check coverage in your area here: https://www.thethingsnetwork.org/map

Using the VE.Direct to LoRaWAN module you can connect your BMV, MPPT or Phoenix Inverter to the Victron Remote Management portal.

View information such as battery status or solar power wherever you are on your desktop or mobile phone.

You can check the status of your connected products on our free remote monitoring website: the VRM Online Portal.

LoRaWAN is a wireless network that operates on the 868Mhz frequency. It has a long range and uses small amounts of power.

The VE.Direct LoRaWAN module can send hourly data updates via this network. You do not need a subscription to make use of this network.

No gateway in your area?

If there’s no coverage in your area it’s simple to add a gateway yourself to improve the coverage of the Things Network, either for your personal use or to benefit others. You can purchase your own gateway or build one yourself.

The post Victron VE.Direct LoRaWAN AU915-928 Module – 4026 appeared first on Luxco Energy.

Bluetooth inside

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify
system installation and enhance performance.

Download the Victron Bluetooth app
Use a smartphone or other Bluetooth enabled device to

customise settings
monitor all important data on single screen
view historical data, and to
update the software when new features become available.

Battery voltage, current, power, ampere-hours consumed and state of charge

Remaining time at the current rate of discharge

Programmable visual and audible alarm

Programmable relay, to turn off non critical loads or to run a generator when needed

500 Amp quick connect shunt and connection kit

Shunt selection capability up to 10.000 Amps

VE.Direct communication port

Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health

Wide input voltage range: 6,5 – 70V

High current measurement resolution: 10 mA (0,01A)

Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings

The post Victron Energy BMV 712 Smart Battery Monitor with built in Bluetooth – Black – 4010 appeared first on Luxco Energy.

The SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as the display.

The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device, connected via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.

The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

Differences compared to BMV712 Battery Monitor

– No programmable visual and audible alarm.

– No programmable relay.

SPECIFICATIONS:

· Supply voltage range: 6,5 – 70 VDC

· Current draw: < 1mA

· Input voltage range: auxiliary battery 6,5 – 70 VDC

· Battery capacity: (Ah) 1 – 9999 Ah

· Operating temperature range: -40 +50°C (-40 – 120°F)

· IP22 Rated

· Measures voltage of second battery, or temperature, or midpoint: Yes

· Temperature measurement range: -20 +50°C

· VE.Direct communication port: Yes

The post Victron Energy – Smart Shunt 500A/50mV Battery Monitor with Bluetooth – 4033 appeared first on Luxco Energy.

Use the MK3-TYPE C Interface to connect the following products to a computer via USB-C for configuration:

· Multi

· MultiGrid

· MultiPlus

· Quattro

· Inverter (only models with a VE.Bus communication port)

· ECOmulti

· EasySolar

· EasyPlus

The post Victron Energy – VE.Bus to USB Type-C Connection Interface to PC – MK3-TYPE C Interface – 4032 appeared first on Luxco Energy.

Bluetooth inside
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify
system installation and enhance performance.

Download the Victron Bluetooth app

Use a smartphone or other Bluetooth enabled device to

·customise settings
·monitor all important data on single screen
·view historical data, and to
·update the software when new features become available.

Battery voltage, current, power, ampere-hours consumed and state of charge

Remaining time at the current rate of discharge

Programmable visual and audible alarm

Programmable relay, to turn off non critical loads or to run a generator when needed

500 Amp quick connect shunt and connection kit

Shunt selection capability up to 10.000 Amps

VE. Direct communication port

Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health

Wide input voltage range: 6,5 – 70V

High current measurement resolution: 10 mA (0,01A)

Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings

The post Victron Energy BMV 712 Smart Battery Monitor with built in Bluetooth – 4005 appeared first on Luxco Energy.

Key Features:

• Built-in 500A contactor for added safety and remote control capabilities.
• Equipped with status LED and Bluetooth LED indicators for easy monitoring.
• Battery monitor displays state of charge percentage and other essential data.
• Pre-alarm signal warns of potential issues before system shutdown.
• Bluetooth connectivity allows seamless integration with the VictronConnect App for setup and monitoring.
• Communication via Bluetooth with VictronConnect app and VE.Can with GX devices such as Cerbo GX.
• Compatible with up to 4 Lynx Distributors for comprehensive system monitoring and setup using the VictronConnect App.

Benefits:

• Enhances battery performance and longevity.
• Provides real-time monitoring and control for optimal battery usage.
• Ensures safety with built-in fall-back mechanisms.
• Allows for easy setup and customization through the VictronConnect App.
• Enables seamless integration with other Victron Energy products for a complete power management solution.

The Victron Lynx Smart BMS 500 is the ideal choice for maximizing the efficiency and reliability of your Victron Lithium Smart Battery system. Take control of your power management with this advanced BMS solution.

The post Victron Lynx Smart BMS 500 (M8) Battery MGMT System appeared first on Luxco Energy.