– 12/24/48V auto select battery voltage
– 20A rated charge current
– 1160W @ 48V maximum PV power
– Automatic load disconnect
– 98% peak efficiency
– Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

Bluetooth Smart built-in: dongle not needed

The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct

For a wired data connection to a Color Control panel, PC or other devices

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm

See the software section on our website for details

Day/night timing and light dimming option

See the software section on our website for details

Programming, real-time data and history display options

– Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.
– ColorControl panel

Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

The post Victron SmartSolar MPPT 100/20 12/24/48V Charge Controller – Blue – 4007 appeared first on Luxco Energy.

· 12V/24V auto select battery voltage

· 15A rated charge current

· 220W @12V or 440W @24V maximum PV power

· Automatic load disconnect

· 98% peak efficiency

· Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

Bluetooth Smart built-in: dongle not needed

The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct

For a wired data connection to a Color Control panel, PC or other devices

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.

The load output is short circuit proof.

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm

See the software section on our website for details

Day/night timing and light dimming option

See the software section on our website for details

Programming, real-time data and history display options

– Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.

– ColorControl panel

Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

The post Victron SmartSolar MPPT 75/15 (12/24V) Bluetooth Solar Charge Controller – 15A appeared first on Luxco Energy.

· 12V/24V auto select battery voltage

· 30A rated charge current

· 440W @ 12V or 880W @ 24V maximum PV power

· Automatic load disconnect

· 98% peak efficiency

· Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct
For a wired data connection to a Color Control panel, Venus GX, PC or other devices

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximise energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).

Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor compensates absorption and float charge for temperature.

Real-time data display options

– Apple and Android smartphones, tablets, and other devices.

– Color Control panel.

Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

The post Victron SmartSolar 12V/24V 30A MPPT 100/30 Solar Charge Controller – Built-in Bluetooth – 4053 appeared first on Luxco Energy.

· 12V/24V auto select battery voltage

· 50A rated charge current

· 700W @ 12V or 1400W @ 24V maximum PV power

· Automatic load disconnect

· 98% peak efficiency

· Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

Maximize Solar Performance with Victron BlueSolar 100/50 MPPT Charge Controller

Important Note about BlueSolar (Non-Bluetooth Range)

For Bluetooth connectivity, please explore our SmartSolar range which includes built-in Bluetooth support, ideal for wireless monitoring and programming. If Bluetooth is required using the BlueSolar range, a VE.Direct to Bluetooth Dongle is required, purchased separately.

Exceptional Energy Harvest with Advanced MPPT Technology
Unlock superior energy harvesting with the Victron BlueSolar 100/50 MPPT Controller, even under clouded skies. Benefit from up to 30% increased energy compared to PWM controllers and outperform slower MPPT models by up to 10%. This ultra-fast tracking technology ensures that you get the most out of your solar panels at all times.

Optimal Energy with Intelligent Shading Response
Experience the advanced Maximum Power Point Detection of the BlueSolar 100/50, which adeptly handles partial shading. Unlike conventional systems that may settle for less efficient power points, our innovative algorithm seeks out the optimum MPP, ensuring you harness maximum energy and enhance your system’s yield.

Peak Conversion Efficiency
Without a Fan Enjoy more than 98% efficiency with the BlueSolar 100/50 — a fanless design that delivers full power output up to 40°C (104°F). With outstanding conversion efficiency, your solar energy system will operate smoothly and reliably.

Customizable Charging for Every Need
Tailor your solar charging with the BlueSolar’s flexible charge algorithm. Choose from eight pre-set modes or customize your settings via our software for a perfectly adjusted charge algorithm that fits your specific energy requirements.

Comprehensive Electronic Protection
Your system is safeguarded with extensive electronic protection features, including over-temperature protection, PV short circuit, reverse polarity protection, and more. This ensures long-term reliability and safety for your solar energy setup.

Precision Charging with Temperature Compensation
The built-in temperature sensor in the BlueSolar 100/50 adjusts charging for maximum efficiency, accounting for environmental temperature variations, thus prolonging battery life and performance.

Take the leap towards efficient solar charging today with the Victron BlueSolar MPPT Solar Controller and harness the full potential of the sun’s power

The post Victron SmartSolar 12V/24V 50A MPPT 100/50 Solar Charge Controller – Built-in Bluetooth – 4043 appeared first on Luxco Energy.

Key Features:

• VRM Online Portal: Easily monitor your system remotely on the VRM Online Portal, ensuring you have access to real-time data at your fingertips.
• Remote Console on VRM: Access your device for setup and monitoring through the Remote Console, whether via VRM, built-in WiFi, or local LAN/WiFi network.
• Automatic Genset Start/Stop: Customize your start/stop system based on parameters like state of charge, voltage, and load, with the option for quiet times and monthly test runs.
• Data Logging: Store data internally for up to 48 hours or extend storage with a micro SD card or USB stick for offline analysis through the VictronConnect app.
• Supported Products: Compatible with a wide range of Victron products including multis, quattros, MPPT solar chargers, BMV monitors, Lynx Ion + Shunt, and more.
• Internet Connection: Connect to the internet via Ethernet or WiFi, with the option to use an off-the-shelf GPRS or 3G router for additional connectivity.
• Tank Level Inputs: Easily connect resistive tank senders to monitor tank levels, with configurable options for European and US tank senders.

The Venus GX not only serves as the Energy Manager in an ESS system but also offers a seamless integration with various Victron products for comprehensive control and monitoring. Whether you’re a seasoned professional or a DIY enthusiast, the Victron Venus GX is the perfect tool to optimize your power system setup and enhance overall efficiency.

Don’t miss out on the opportunity to streamline your energy management with the reliable and feature-packed Victron Venus-GX Systems Controller & Monitor!

The post Victron Energy – Venus GX Systems Controller and Monitor appeared first on Luxco Energy.

The post Victron Energy – 12V 7A IP65 BlueSmart SLA/LiFePO4 Battery Charger – Built-in Bluetooth – 4037 appeared first on Luxco Energy.

The post Victron Energy – 12V 10A IP65 BlueSmart SLA/LiFePO4 Battery Charger – Built-in Bluetooth – 4038 appeared first on Luxco Energy.

The post Victron Energy – 12V 15A IP65 BlueSmart SLA/LiFePO4 Battery Charger – Built-in Bluetooth – 4039 appeared first on Luxco Energy.

The post Victron Energy – 12V 4A IP65 BlueSmart SLA/LiFePO4 Battery Charger – Built-in Bluetooth – 4035 appeared first on Luxco Energy.

The post Victron Energy – 12V 5A IP65 BlueSmart SLA/LiFePO4 Battery Charger – Built-in Bluetooth – 4036 appeared first on Luxco Energy.